Tuesday 9 February 2016

Disappearing Nine Patch - Part I

I have decided to start my sewing year with a quilt.  I've spent quite a while thinking about what I want to do with fabrics I already have and in the time I have available.

I have been reading up about disappearing nine patch quilts here, here and here.  I was taken with the setting which imitates sashing and corner stones and decided that might work with the fabrics I have to hand at the moment.

Working from the premise that my individual squares would be cut at five inches based on the common size of commercially available charm packs I began to do some sums.

My quilt will be made up of nine nine patches that's 84 individual squares which would equate to two commercial charm packs at 42 squares each.  These will be made up of:

  • Nine red for centre of the nine patch blocks - these will become the corner stones
  • Thirty-six cream for the middle patches on each side of the blocks - these will become the sashing
  • Thirty-six coloured prints for the corner patches of each block - I cut six of each from six different fabrics



Here are all the squares cut out nice and tidy - a couple of hours work over a couple of evenings last week.  Speed is of the essence with this project as I don't have loads of time and I need to keep the momentum up.

The next step was to chain piece nine red squares to nine cream and then set aside nine cream for later.



I am working on the Singer 201K1.   I have read that this is the correct designation for a Kilbowie built machine originally fitted to a treadle.  I recently shortened the belt on this one.  It has made a world of difference.  The belt must have stretched making it tricky to get the machine to start and stop.  It had a tendency to run backwards at the beginning, run-on when stopping and stalling altogether when crossing thicker seams.  I took about 3/8ths of an inch off the length for the time being and now the machine is performing faultlessly.

The thread is Gütermann 100% cotton and the machine is set to 15 stitches per inch. I used my trusty cloth guide to help maintain a scant quarter inch seam.  I chain pieced the 18 remaining cream coloured squares to 18 of the mixed colours, three of the six different fabrics.  This is the resultant heap of chain piecing.


I snipped the paired squares apart and had a bit of a tidy up.  Here are the paired up squares stacked on the treadle table prior to pressing.  I production lined my pressing.  Pressing all 27 pairs as sewn and then open with all seams away from the cream squares.  I tried letting all my pressing cool on the ironing board before moving the units.  I'm told it helps the pressed seam allowances stay put.


My next step was to add the remaining nine cream squares to the opposite edge of the red ones.


And then the remaining 18 mixed colours to the other pairs.  Selection of the mixed prints at this stage isn't too crucial.  The reason for this will become clear next time.


Much more pressing and the nine patches are starting to take shape!  From winding the bobbin to taking the last photograph took just under three hours.  A nice way to spend a blustery Sunday afternoon.



Wednesday 20 January 2016

Oliver + S: Family Reunion Dress


This is a dress I made around the end of 2014 in readiness for Christmas of that year.  I never got around to blogging about at the time.  I did however take some photographs during making up.  I bought the digital version of the pattern, printed it all out and stuck it together with tape.  I don't mind the process too much.  My version is sized to 24 months.  At the time the recipient was only 16 months but I pictured this dress getting more wear during the following summer and as it was intended to be a surprise I allowed lots of margin for growth.

I had a nice pale blue 100% cotton print in the stash, a little fusible interfacing and some reused shirt buttons.  The apparently simple, short-sleeved, A-line dress has quite a bit of detail.


The dress is shaped by tucks over the chest and back.  I sewed the dress using the Singer 201K treadle and used a vintage tuck marker to help me form the tucks.  Using the vintage attachment was fun but I would imagine that with careful measurements and thread marking one could easily manage without.


The dress buttons up the back.  I made the buttonholes on the Singer 201K fitted with Greist buttonholer.  The neckline facing is interesting in that it is turned to the right side and edge stitched in place.


The pattern has nice deep seam allowances and gives the usual modern instructions for finishing them with a zig-zag, serger or however else you might wish to.  I cribbed Muv's flat felled shoulder seams from the child's dress pattern she drafted and made.  The sleeves are hemmed, gathered and attached to the armscye before the side seams are closed.  I finished the sleeve head seam allowance with a zig-zag using the Singer 401G.  This was quick but if I made the pattern again I might make matching bias and use that to bind this seam. 



I used good old reliable French seams to close the sides of the dress which just made my zig-zag short cut on the armholes look even sloppier.

The pattern made quite a feature of what Oliver+S calls its signature hem.  This consists of a deep hem facing, worthy of the 1840s, turned to the inside and edge stitched.
 


The facing is then decorated with an additional five rows of topstitching spaced at quarter inch intervals.  The result is a good looking, firm hem which hangs well and is suggestive of hard wear.

This was a a very sweet little project to sew.  I would definitely make it again and would look at using Oliver+S patterns again in the future.

Tuesday 10 February 2015

Welsh quilt inspired sampler

I think it is nice, sometimes, to not really know where I am going until I get there.  That is how it was with this piece of work.  I cannot bring myself to refer to it as a project as that might imply that I had some sort of plan.  At some point I had been loaned a Kaffe Fasset book that included a quilt top pieced from a variety of striped shirtings in four triangle squares.


Well I messed about with some triangles and came up with some less than delightful squares one of which just about looked like it might be a distant relative of something from a Kaffe Fasset quilt (see above top left corner.  This was where direction changed both literally and notionally.  The nasty squares became the back of a tiny sampler for some quilting


I had been reading about the wonderful quilts produced in Wales between the first and second world wars.  What really fascinated me about these was reading how quilts were marked out by professionals who sometimes stamped the designs onto whole cloth quilt tops which would be sold and sometimes they were marked out by drawing around ordinary house hold objects like tea cups, plates and irons.  I was rather captivated by the idea but doubtful that I would find myself marking out and hand quilting a double sized bedspread.  Instead I made up a small quilt sandwich and grabbed a tea plate and pencil.  I marked out this simple motif of circles leaves and chevrons.

Traditionally this type of quilting would be done by hand but I quilted this sampler on my Singer 15K hand crank machine making up the infill as I went along.  It's a bit wonky here and there but I find the slightly naive effect pleasing.  I ended up thinking of the technique as a sort of straight-line-semi-free-motion quilting.  I doubt it will catch on but I felt I had spent enough time on this to add a binding.  I did a bit of hand ladder stitching on the binding - way too tight just look at all those puckers!  I've hung this little oddity, from one corner, on a nail that was in the wall of the sewing room.  I don't think anyone really knows what to make of it but yellow and white always makes me think of fried egg and somehow my interest in and appetite for Welsh and Durham whole cloth quilts has been whetted.


Monday 9 February 2015

Three little Dicky birds


I can't claim this as my own.  It's a vintage item that The Much Belovéd's mother sent from the US.  I think it is such fun I wanted to share it with you all.  I think it is the cutest tea towel I have ever seen and in some ways it's too good to use.  I guess this dates from 
the late 1950s or early 60s.




A closer look reveals how deceptively simple this appliqué is.  Each bird is made up of two contrasting strips of bias with the twig made of brown bias.  the eyes, beaks and legs are back stitched with embroidery thread.  Anyone feeling inspired to make a copy?




Also from the 1950s I leave you with some other singing birds - British ones this time though.



Tuesday 2 December 2014

An apron and lots of bias binding (again)

Alright I promise that, during my sabbatical from blogging, I did sew something other than aprons but for the time being that is what I a bringing us all up to date on.  No more aprons for a while after today.  At least for a little while.

I have already blogged about Sewing Machine Basics by Jane Bolsover.   The pattern for this full length apron comes from that.  The pattern pieces for this and the other projects in the book are included on large sheets at the back of the book for you to trace off yourself.


The book is neatly arranged for the sewing novice.  Each chapter takes the form of a 'Workshop' which teaches the reader a new technique.  This is then followed by a project which makes use of the newly acquired skill.  The 'Bound-edged apron' project tests -guess what? - the use of binding and patch pockets.


I decided that the usefully sized pocket should not pattern match with main apron piece.  I did however try to centre the pattern piece on a motif so that over all the pocket ended up looking balanced.


I was very much in Singer 15K80 mode when I was making aprons during the late spring of 2014.  Hardly surprising I got a bit smitten with that machine once I got it sewing well.  Just look at those stitches!  I am rather proud of the triangles strengthening the corners.  Remember, after all, I was able to achieve those on a hand cranked machine which lacks a reverse feed - lots of needle down, presser foot up, action going on and I actually counted the stitches while I was sewing.


I am slightly less proud of the above nonsense.  The method of attaching the binding involved sewing through all layers at the same time - it looks a lot better from the right side.  This being me I was able to include, even on an apron with only two very simple pattern pieces, a flat felled seam, albeit a very short one at the nape of the neck.  There is no way I could "press open and finish seam allowance with a zig zag" given the machine I was using to sew this project - what's a boy to do?


I cut out the ties using a ruler and rotary cutter on the long grain of the fabric.  They are stitched along their long edge, turned through and then the open ends turned in and topstitched to the apron edges with a square and cross thingy.
  

All the raw edges are encased with home made bias binding.  Lots of measuring and fun!  Recognise the green fabric from the second apron with a ruffle?  I told you my stitching looked more even from the right side didn't I?


Here is the finished apron all ready to be sent off it's new owner - ignore all those work shirts that needed ironing!

Sunday 30 November 2014

Another apron with a gathered ruffle

This ruffled apron is separated from the first by about eighteen months of time.  The first was such a hit with the ladies of the family that a second was needed to prevent a charge of favouritism on my part.  I was able to take more detailed pictures of the second apron before I gave it away to my Mam.


This apron is made of printed cotton poplin and lined with some plain white poly-cotton so that the raw edge of the ruffle is fully enclosed and the apron has a nice amount of heft, or body, or whatever you want to call it.


 The curved patch pocket is edge-stitched in place.  The side seams are angled slightly toward the top so that the pocket forms an open bag.


This being apron mkII I knew that I wanted to make sure to match the bobbin thread to the white lining fabric rather than to the green pocket.  Sewing with two different colours of thread is a dead giveaway for uneven tensions so full marks to the Singer 15K80 I sewed this with!



The ruffle is gathered at a ratio of 2:1.  When I first used this pattern I sewed the running stitch for the gathering by hand.  This time I was bold, I was brave, I was fearless and used a vintage Singer ruffler attachment.  I had to mess about with scraps a bit to get the fullness of the gathers as I wanted them.  I wasn't quite brave enough to use the ruffler to gather and sew the ruffle onto the apron in one operation as the old manuals suggest is possible - one step at a time!  I probably didn't save much time but using the ruffler was a lot of fun and the results are a pleasing firm even gather.


The instructions on finishing the ties are pretty nifty too.  The square ends are folded in on themselves at 45 degrees to produce neat points that are pressed and edge-stitched in place.


And one last close up of the hemmed edge of the ruffle in case any one is any doubt over how tasty the stitches produced by a 56 year old machine really are!



An apron with a gathered ruffle

Dear readers and follows I am sorry not to have written sooner.  I really don't know where the time has gone.  More responsibility at work plus regular weekend working, a new home with, for the first time, a garden?  Big changes seem to have left little time for blogging and sewing during 2014.  The choice: sew or blog so I sewed and left the blog in free fall.  Similar to not getting in touch with a friend or relative the longer you leave it the harder it gets.  Time for an update?  Past time!

The pattern for this apron came from the Liberty Book of Home Sewing.  My version, pictured below, was one of the first things I made on the Singer 401G - months before I wrote my first blog entry.  It's modelled beautifully by my gorgeous and glamorous sister.  The apron was a birthday present for her.


 I really enjoyed putting this project together.  It was one of the first things I shopped for specific fabric for.  It's made of Liberty Tana Lawn in the Carline and Glenjade patterns.  It really is lovely stuff to work with as I am sure many of you will know.  The pattern requires only two pieces which I drew on squared paper following the instructions from the book.  The waistband, ties and frill are all straight cut across the width of the fabric using a rotary cutter.

The apron was fun to make and allowed me to develop a couple of new to me, at the time, skills

  1. Patch pockets
  2. Gathering
  3. Bagging a lining
I followed the book instructions for gathering the ruffle which involved hand sewing a running stitch the length of it.  This must have added quite a bit of time to the making.  I didn't know at the time that I could just have easily sewn a long machine stitch with a loose top tension in much less time and achieved the same effect.  Thank goodness I have read some more books since then.  The next step was marking both the apron and the ruffle with pins at different spacings and gathering the latter down to the same spacing as the former.  The result was pricking even gathers!

The one other thing I would have done differently in hind sight was to make sure I matched the bobbin thread to the apron lining when I attached the patch pocket.  I never thought - experience (or lack there of) once again.